Bridge Studio Corning

IN CORNING TOMORROW

2010-04-30T11:21:00.000-07:00

The Iowa State Bridge Studio will be coming to Corning tomorrow (May 1st) to display the work we have done this semester on the Corning House. You can meet us down at the community center at 1:00 PM to see the work and talk with the designers. We'll be around till about 5:00 PM to talk about the design. See you there.

Cut & Fill 101

2010-04-14T13:35:00.000-07:00

Click on each photo to get a closer look

New House Images

2010-04-08T20:15:00.000-07:00

Here is the front of the Corning house based on the plan revisions. The porch wraps around the house and extends the usable living space beyond the interior. There are plenty of windows, making the interior bright and increasing the connection to the outdoors. Although the home has a contemporary feel, the design incorporates and reinterprets traditional architectural features.

The back of the Corning house connects to either a garage or carport and includes a no-step entry for easy accessibility.

Adams County hits front page!

2010-04-04T07:51:00.000-07:00

The front page of today's Des Moines Register features an article entitled "Iowa's Smallest County" by Jens Krogstad that discusses life in Adams County, home of Bridge Studio 2010. Alas, the section on the studio was left on the cutting room floor (I did talk to the reporter) but it's still a good article and great publicity for Iowa's smallest county!

Here's a link:
http://www.desmoinesregister.com/article/20100404/NEWS/4040340/Adams-County-s-population-erosion-shows-tiniest-communities-challenges

New Revisions

2010-03-31T14:23:00.000-07:00

Take a look at our newest approach to the Sol. Feel free to comment as we always like to hear from our fans.

Rain Gardens

2010-03-31T12:53:00.000-07:00

As per our Iowa Green Streets requirements, we will have to capture, retain, infiltrate and/or harvest the first 1.25 inches of rain that falls in a 24-hour period. This is mandatory for new construction project applications submitted after January 1st, 2010. As such our site team has been searching for examples of attractive rain water retention gardens and here's what we've found. Feel free to comment on which one you like best!

Also, check out this link to learn more about rain gardens!

Design Revisions

2010-03-16T09:10:00.000-07:00

We've made some design revisions to include comments we've received. We're now working with the following parameters:

1. Finished space that will be built should all be on one level, around 1000 square feet, with 2 bedrooms and 1 full bath.
2. House should have a full basement with egress windows for potential future expansion.
3. A more traditional exterior is preferred.

We have a revised version of the bungalow (Beta), Elodie, and 3 variations on Sol. The exterior image can be used for any of the plans. Please let us know what you think!

This is the Beta bungalow plan.

This is the Elodie plan. Note that the bedrooms are facing the street, kitchen and living area in back near garage.

This is Sol version 1 - kitchen is closer to the back door. A full wall at the stair allows for cabinets.

Here's Sol version 2 - the kitchen is again closer to the garage but stair is open with cabinets against the exterior wall.

This is the original Sol (now version 3) with the kitchen in the northeast corner.

And finally an exterior image that would work with any of the plans. The roof would be built with trusses with insulation in the ceiling between attic and living space.

Comments

2010-03-12T12:54:00.000-08:00

Hello All,

Below you will find several design options for the Corning House! You will also find comments below each. Please feel free to create comment strings as we'd like this to be an on going open discussion on the design so that we can make informed and democratic decisions.

Here are some general comments on the designs and systems involved:

System Discussion:

People like Options 3&4 but worried about cooling potential.
Many wished they could experience these systems to see if they really worked.
A local HVAC person has done hydronic systems in the past.
Responsiveness of systems was a concern (managing expectations important)
Many saw the potential advantages of designing the house around the system rather than the system around the house.
Corning residents generally live in the same home for a longer period than people elsewhere, so energy savings can result in a significant figure.
Some commented that our estimates for utility savings on Option 2 were low.
What flow rate is needed to engage a tankless water heater?
How are supply and return air vents positioned with an HRV?
People suggested that a wall or window air conditioner would suffice for cooling or be added later if cooling strategy didn’t meet needs. You could frame this in for retrofit.
Wood or corn stove as auxiliary?
Reassess the idea of ‘comfort zone’ in relation to systems. What compromises must be made?
Controlling humidity goes a long way to help cool

Design Discussion:

Consider ag and road dust because it can be a big concern.
Mixed opinion about interior backer walls for SIPs and thick wall construction. Perception of wall depth. Takes up a significant amount of square footage.
960 sf minimum footprint for single story in Corning
Stairs should be at least 4ft wide to allow passage of larger items
Trusses are more expensive than shed roof
Is two story appearance too much for an already prominent site?
Consider distance from entry to kitchen for groceries
People want a garage
Pitch of roof should be at least 3:12 to avoid leakage. Flatter is okay if roof is drains in multiple directions.
Overhangs are important. How do you make them economical?
Keep replicability in mind. Potential for an infill site?
General consensus was that ranches were more desirable than two story homes.
Contractors said stairs on exterior walls were cheaper.
Could you use spray-on insulation on the exterior of a foundation?
Quick cost estimate rules:

o $100 / sf for first floor

o $50 / sf for upper stories

o This assumes 2x4 walls, vinyl siding, asphalt roof, and basic finishes

Project Elodie

2010-03-12T10:23:00.000-08:00

Project Beta

2010-03-12T10:20:00.002-08:00

Project Alpha

2010-03-12T10:20:00.000-08:00

Project Solace

2010-03-12T10:18:00.000-08:00

Project Lift

2010-03-12T10:17:00.001-08:00

Project Sol

2010-03-12T10:16:00.000-08:00

Design Ideas

2010-03-12T10:15:00.000-08:00

On our last visit to Corning, we presented six different project ideas and received some great feedback from those who attended the workshop. For these of you who weren't able to attend or would like to add more thoughts, I am going to post images for each of the six projects that you can comment on. I'll do each in a separate post with the title matching the project title. The six names are: Sol, Elodie, Alpha, Beta, Solace, and Lift.

Site Plan

2010-03-12T08:49:00.000-08:00

What a challenging site! Site plan is coming along nicely though. The three A's (adam, andy, and art) are working hard to come up with a good design. Should have a site model done by the end of spring break. Will post pictures soon.

Comments should be working!

2010-03-08T10:40:00.000-08:00

Apologies to everyone for the glitches with the comment feature - thanks to Art who has fixed the settings so everyone should now be able to post comments.

And I know I've promised to get the drawings from last week's meeting posted - I've been at a conference in New Orleans (no snow!) but am back now so should get everything up in the next day or two so stay tuned!

Nadia

Goin' Social!

2010-03-01T14:05:00.000-08:00

Hello All,

You can now become a fan of us on Facebook and follow us on Twitter!

Here is the Facebook Page

Here is the Twitter Page

Check it out!

Back from Corning

2010-03-01T05:21:00.000-08:00

Thanks to everyone in Corning for another great visit! I have to say, I'm going to need to start a new exercise program to make up for all the great food, especially the brownies!

We started out the morning with a salon-style discussion of the various design and technical options that the students had prepared - people walked around and talked to students about their work. In the afternoon we met with local contractors Jeff and Carl to discuss pricing and building systems. We had three different design "types," each with a couple of variations: the bungalow, the 4-square, and the front/back or ranch. For building systems, we focused on building envelope and HVAC systems as these are the most important for increasing energy efficiency and reducing utility bills.

It sounds like basements are definitely in and, for both cost and sales reasons, plans that can begin with around 1000 square feet of finished space on one level (with opportunity to expand up or down) are the way to go. SIPs construction and advanced framing are possibilities for building envelope and everyone expressed a lot of interest in the Heat Recovery Ventilator system that can eliminate the need for a conventional furnace by recovering heat from already heated air and using it to heat new, fresh air.

The drawings are going to be up at the arts center in Corning so if you missed the visit on Saturday please come by and have a look. There will be comment sheets available or you can leave your comments on the blog!

Nadia

First ideas presentation in Corning

2010-02-26T13:49:00.000-08:00

The Bridge Studio is off to Corning tomorrow, Feb. 27, to present a range of design and building systems ideas to the people of Corning! The class has been working in two groups, one focused on design ideas and one researching building systems. For the meeting tomorrow, we will have 3 different design schemes (each with several options) plus technical proposals for building envelope and ventilation/environmental systems. We are looking forward to an exciting visit and will have the graphics from the presentation posted here shortly!

Bridge Studio Blog!

2010-02-24T11:04:00.000-08:00

Hello and welcome to the Bridge Studio 2010 Blog! Over the next several weeks you will be able to follow Iowa State University Design students as they work collaboratively with the City of Corning, Iowa to develop a design for an affordable and sustainable single family home. Though the studio is only designing one home for one site, the hope is to create a model home that can then be applied to multiple sites within the community of Corning, and possibly throughout the state.

Feel free to leave comments on the work in the links below each post, as we hope the blog will generate democratic, cooperative, and interdisciplinary discussion.

Can't wait to hear what you say!

-Bridge Studio Corning